Vanliga Frågor

Vanliga frågor och svar ang Warp10®(eng) (En översättning är under bearbetning)

How often can I use the WARP 10® light?
NASA has defined that 8 joules (two 80 second doses) is the recommended limit for tissue absorption. The recommended time between 8 joule doses should be 12 hours. Much like a typical plant, the body needs time to make efficient use of the energy. The light will emit beneficial pain relief. There has never been any indication of the slightest side effect or unintended effect documented. This fact makes the WARP 10 ideal for chronic pain sufferers. 

Can the WARP 10 help my chronic pain?
The WARP 10 is a hand held device used for the treatment of chronic pain by emitting energy in the Near-IR spectrum for the temporary relief of minor muscle and joint pain; arthritis and muscle spasm; relieving stiffness; promoting relaxation of muscle tissue; and temporarily increase local blood circulation where applied.

How close to the skin should I hold the WARP 10?
For best results, the WARP 10 should be touching the skin. Take your finger and point it to the central area of pain, and then hold the unit directly centered on that point.

I accidentally hit the ‘Stop’ button during my session. Why does it take so long for the delay light to go off?
The delay light will stay on until the normal timed cycle (80 seconds) has completed. You can then restart the mechanism. This feature was added as a safety feature for our Armed Forces. There is no battery usage during the timer’s click down.

Can you recommend a battery for usage?
Although you can use standard AA alkaline batteries to operate your WARP 10, we highly recommend the use of Nickel Metalhydride (NiMH) rechargeable batteries. This battery type almost doubles the amount of uses from the WARP 10 and in many cases the batteries can be recharged up to 1000 times, reducing operating costs to just pennies per dose.

What wavelength does the WARP 10 operate at?
The WARP 10 operates at a peak wavelength of 670nm.

How many LEDs does the WARP 10 have?
The WARP 10 utilizes 48 Chip mount LED die to provide 50 mW/cm ² over a 10cm2 diameter area. The total photon energy over the 10cm2 area is equal to 500 mW.

-----------------------------------------------------

(Översättning till svenska pågår, kommer snart)

Sunlight causes wrinkles, among other kinds of skin damage, but a different kind of light - specifically the red glow from LEDs - may help to smooth them out by altering the interactions between water and elastic proteins in the skin. Andrei Sommer and Dan Zhu of the University of Ulm in Germany have been investigating how water molecules in the skin interact with different substances.

Light therapy is a gentle process by which energy is delivered to the skin via light emitting diodes (LED) and is absorbed by the cells for therapeutic benefits through a process called Photobiomodulation. The near infrared wavelengths penetrate the skin and stimulate different metabolic activities, providing the energy cells need to activate production of ATP (adenosine triphophate), new collagen and elastin and increase circulation; leaving your skin healthier and younger looking.

Esthetic Procedure for Photon Facial
By Lynn Dellapasta
Westshore Skin and Health Center - Westlake, Ohio

Frequently Asked Questions

Is photo rejuvenation safe?
YES! It has been proven in numerous studies that Far Red to Near- Infrared(670nm) LED photo rejuvenation does not harm the human body. The energy delivered is safe for all skin types.

How long will I have to use 670nm light before I see results?
You should notice a healthy glow after the first treatment. However, each person responds at different rates. Factors that influence this include various physical conditions, age, diet, alcohol consumption, prescription drug usage, smoking, exercise, etc.

How do 670nm lights for home use compare to the photo rejuvenation light treatments done in spas and salons?
The concept is the same. The technology is, however, quite different. One photo rejuvenation treatment in a spa or salon typically costs $50-$200, and it's usually recommended that you get a series of 5 to 10 treatments several times a year. With many of the devices being no better than a flashlight, your better off with home-use photo rejuvenation. You can enjoy unlimited treatments in the convenience of your own home for less than $1000.

Is 670nm light safe for extremely sensitive skin?
Yes... there are no known contraindications. If you have rosacea we would recommend going slow to see how your skin reacts. Some rosacea clients have seen benefits by limiting treatments to twice per week.

What is the difference between 670nm and the other light therapy devices?
The three most important things to know and understand about light therapy: wavelength, irradiancy and dosimetry. Our device operates at a wavelength of 670nm, 60mW/cm2 irradiancy and a dosimetry of 5 joules/cm2 per 88 second dose. These are the necessary attributes to achieve a biological result.

Does 670nm light therapy hurt?
NO! Unlike many other anti-aging treatments, 670nm light therapy is gentle, painless, safe, noninvasive and nonabrasive. There have been no reports of adverse reactions.

Is it safe to use 670nm light while pregnant?
According to FDA regulations, they recommend not using it around the abdomen. Continued research is necessary. You can use 670nm light safely on the head, (do not stare into light, wear goggles or close eyelids) neck, face, arms and legs during pregnancy.

Will 670nm light therapy help with acne or blemishes?
Although anti-aging photo rejuvenation lights were not designed specifically to handle acne and blemishes, the light waves stimulate the skin's natural healing process which helps in the treatment of pimples and blemishes. 670nm light can assist the skin's recovery after acne. UV light is necessary to kill the bacteria of acne.

Will 670nm light assist with hyper-pigmentation (age spots) or scarring?
Possibly, we have seen reports of hyper-pigmentation and scars fading over time with the use of light.

Will 670nm light help with dry skin?
YES, using 670nm LED photo rejuvenation should help normalize your skin.

While doing research on the Web I read that yellow light is effective for skin rejuvenation. What are the benefits and results of 670nm light therapy vs. yellow?
The companies promoting yellow or amber lights have only completed case studies not a clinical trial. They also use the light in conjunction with a skin care regimen. What's to say the results weren't from that? If a wavelength is below 650nm, that wavelength will be absorbed by the melanin of the skin. This does not allow for deep penetration. Our device has been tested and involved in the most research and clinical trials regarding LED. 670nm is found to work better for skin rejuvenation.

Will 670nm light help with thinning hair? Will it help re-grow hair?
We have read reports of accelerated hair growth and stimulation of dormant hair follicles with the use of 670nm light. Are these claims true? We have not seen any scientific papers to show results yet. But the light does stimulate cellular activity in underperforming cells... so who's to say it won't?

Can 670nm treatment be used on someone who has been treated recently with Botox® injections?
We believe the light would cause no harm to the tissue, however, since it has a regenerative effect it might shorten the life of the paralyzing effect of Botox, so the person might want to avoid using the light around the injected areas until the Botox wears off. HOW TO APPLY NEAR-INFRARED LIGHT

How long do you need to apply the 670nm light for skin rejuvenation?
Starting at the neck and working your way up and around the face, give yourself one dose and then move to next area. Repeat this treatment 3 - 4 times per week for 4 - 6 weeks and then once every other week to maintain.

Should I wear protective eye goggles when I use 670nm light on my face?
Research has shown this wavelength to be safe, just close your eyes.

How far away should I hold 670nm lighting device from my skin?
The device should be placed directly upon the skin.

I tried 670nm light on my inflammatory arthritis and it reduced the bouts of pain from a week down to a couple days. I want to share this with family members, are there special instructions?
The device should be used as needed for pain, just as you would use aspirin or other pain medication. When treating a joint area, make sure to irradiate completely around that joint.

I had a huge bruise on my leg so I tried my 670nm light on it, and it went away much more quickly than bruises typically do. Does it make sense that the light works on bruises?
The research we did for NASA showed tremendous benefits for inflammatory and circulatory conditions. You'll be pleased with the results!